Plug Plate
Plug plate (also called hole-with-piece plug gauge) is used as a gauge to measure the inner hole diameter; for plug gauges larger than Φ65 and above, it can be made in a single-head incomplete type. It is also referred to as clip plate/clip gauge (non-standard), shaft clip plate, through gauge, through gauge stop, and plug gauge.
Product Description
During inspection: if the through end of the snap plate can pass through the workpiece, but the end cannot pass through the workpiece, the workpiece is considered qualified. If the through end of the snap gauge can pass through the workpiece and the end can also pass through the workpiece, the workpiece size is too small and should be scrapped. If both the through end and the stop end cannot pass through the workpiece, the workpiece size is too large, is not qualified, and must be reworked.
Product Detail Drawing
Product Parameter
|
Norm (reference) |
Norm (reference) |
Norm (reference) |
|
Φ5–Φ24 |
Φ100–Φ180 |
Φ470–Φ500 |
|
Φ25–Φ39 |
Φ190–Φ240 |
Φ500–Φ550 |
|
Φ40–Φ49 |
Φ250–Φ280 |
|
|
Φ50–Φ64 |
Φ290–Φ320 |
|
|
Φ65–Φ85 |
Φ190–Φ199 |
|
|
Φ86–Φ99 |
Φ430–Φ460 |
Stop Gauge
|
Norm (reference) |
Norm (reference) |
Norm (reference) |
|
Φ5–Φ24 |
Φ100–Φ180 |
Φ470–Φ500 |
|
Φ25–Φ39 |
Φ190–Φ240 |
Φ500–Φ550 |
|
Φ40–Φ49 |
Φ250–Φ280 |
|
|
Φ50–Φ64 |
Φ290–Φ320 |
|
|
Φ65–Φ85 |
Φ190–Φ199 |
|
|
Φ86–Φ99 |
Φ430–Φ460 |
High Speed Steel Snap Gauge
|
Norm (reference) |
Norm (reference) |
Norm (reference) |
|
Φ5–Φ24 |
Φ100–Φ180 |
Φ470–Φ500 |
|
Φ25–Φ39 |
Φ190–Φ240 |
Φ500–Φ550 |
|
Φ40–Φ49 |
Φ250–Φ280 |
|
|
Φ50–Φ64 |
Φ290–Φ320 |
|
|
Φ65–Φ85 |
Φ190–Φ199 |
|
|
Φ86–Φ99 |
Φ430–Φ460 |
On-site Pictures
